Redecorating is a more difficult task than people imagine; you might spend hours on a task but it doesn’t quite turn out as you expected. If you’re sanding and repainting a wooden floor or upcycling your old wooden furniture, then wood primer is your friend. It will help you to get that professional look with minimal effort. However, knowing how to apply primer on wood is the key to getting a great finish.
Applying primer to wood helps to hide any cracks, knots, or imperfections, making your design a little more pleasing to the eye. Applying wood primer also gives you the ideal base for paint. It protects your wood with a seal, meaning that your paint doesn’t soak in and you’ll achieve a brighter colour. It also stops paint absorption from expanding your wood and ruining your design.
Sand the Wood
It’s obvious that primer is the way forward. But first, it’s essential to find out how to apply primer on wood correctly to get the best finish.
To begin with, you need to remove any old varnish or primer. Floor sander rental London is a great option to get a short-term floor sander. Simply sand away the top layer of your wood, then wipe away any excess dust with a damp cloth. Don’t leave your surface wet though. It will need to be fully dried before you apply your primer.
Mix Your Primer
When you purchase a good primer, make sure you check out exactly how much you’ll need to cover the area. You should complete the job in one go to avoid your floor looking uneven later, so you don’t want to run out.
When you open the primer, you must give it a good mix. In the tin, the water will rise to the top and separate from the oils. If you don’t mix before you apply your primer, it will be too thin and get gradually thicker as you use more. You need an even consistency.
Apply Primer on Wood
Depending on your area, you can either use a brush, a roller, or a spray paint gun to apply your primer. It’s the quickest and easiest to use a spray paint gun. However, this is likely to use much more primer and you will need to pay close attention to areas that might have a thinner layer. Make sure it’s evenly spread.
Allow to Dry
You should wait for 6-8 hours before applying any varnish or paint to your primer. It should be completely dry and not sticky. This makes it easier to apply anything on top and also means that you’ll have a smooth finish later.
Sand the Primer and Apply Primer on Wood for a Second Time
If you want to paint the wood, then a second coat of primer is absolutely necessary.
In this case, sand the primer using sandpaper, remove the dust, and repeat the same process – again waiting up to 8 hours before applying any paint or varnish.
A Great Wood Finish with Floor Sander Hire
At Floor Sanders London, we offer a range of floor sanders to help you transform your wooden floors quickly and easily, with a professional finish. Hiring a floor sander means having the highest quality equipment for a fraction of the cost. Once you’ve finished your job, we’ll collect the sander and you’ll be left with perfect results.
For reliable floor sander rental in London, contact us today!